Tweet
Here's one I did with a Metabo and D151. Products used was D151 for correction with SB 2.0 cut pad + SB 2.0 polish pad, I also used 4" Uber pads (detailerdomain) for smaller panels and tighter spots. Car got Poorboys White Diamond Glaze after D151 (I didn't let D151 haze over, and I also did a full IPA wipedown on each panel).
Was a present to some friends of mine that got married - the owner didn't recognize the car when she came to pick it up... Spent a total of 13 hours including washing / degreasing / claying.
Befores:
Level of correction on this car - left side untouched, right side after 1 round with cut-pad - not much gained with an additional pass, and as I didn't have a paint gauge I didn't dare push it further:
Some afters:
Tires didn't get any particular TLC as I ran out of time, but I've promised them do put a "winter-coat" on the car (#21 2.0 and #16) so I'll do them then.
Hope you liked what you saw
Was a present to some friends of mine that got married - the owner didn't recognize the car when she came to pick it up... Spent a total of 13 hours including washing / degreasing / claying.
Befores:
Level of correction on this car - left side untouched, right side after 1 round with cut-pad - not much gained with an additional pass, and as I didn't have a paint gauge I didn't dare push it further:
Some afters:
Tires didn't get any particular TLC as I ran out of time, but I've promised them do put a "winter-coat" on the car (#21 2.0 and #16) so I'll do them then.
Hope you liked what you saw
and I did a 
Comment