well i got some free time to mess around with my tools.
after reading the paint thickness around the car and take pic with all readings (just a routine) i proceed with wash /clay/ wash again. i wetsand with 2500 grit all 4 door panels , trunk , and all 4 1/4 panels.
i remove most of the orange peel i will say a good 70 % , i didn`t wanna go to agresive because is factory paint plus i don`t garage the car.
the roof had some bad oxidation from previous owner and the paint was thin so i use less agresive pad and compound. came up nice, a huge improvement.
i may upgrade the tread with some more pic , i have left to clean the windows and get some pic with all the seal/wax apply ,it got dark and couldn`t get any after the final step was done.
reading the paint thickness of the aluminum hood:

pass door:

in process:


some reflections in the trunk after wetsand/buff/polish , no seal or wax in this image

another after:
after reading the paint thickness around the car and take pic with all readings (just a routine) i proceed with wash /clay/ wash again. i wetsand with 2500 grit all 4 door panels , trunk , and all 4 1/4 panels.
i remove most of the orange peel i will say a good 70 % , i didn`t wanna go to agresive because is factory paint plus i don`t garage the car.
the roof had some bad oxidation from previous owner and the paint was thin so i use less agresive pad and compound. came up nice, a huge improvement.
i may upgrade the tread with some more pic , i have left to clean the windows and get some pic with all the seal/wax apply ,it got dark and couldn`t get any after the final step was done.
reading the paint thickness of the aluminum hood:

pass door:

in process:


some reflections in the trunk after wetsand/buff/polish , no seal or wax in this image

another after:

Comment