Tweet
I washed this Jeep on Wednesday and did my test spots and then finished it up today. You would think this is an easy vechile to detail, it isnt. The amount of vinyl/rubber trim, bugs loaded up on the windshield and front end, so many bonded conataminants you can see where you did and did not clay, I could only use my G110 on the hood and two doors, the restof the body panels are really tight and restricted. Its a good thing I picked up a gallon of M40 and more Speed Glaze today, i needed them.
Process:
1. Wash with Gold Class Car Wash Shampoo & Conditioner
2. Clay with Smooth Surface Clay Kit and Quik Detailer (Trigger)
3. #80 - Speed Glaze on the G110 with a SoftBuff 2.0 Polishing Pad
4. NXT Generation Tech Wax 2.0- by hand.
5. Tires got Hot Shine High Gloss Tire Spray
6. Fender flares and vinyl/rubber pieces got #40 - Vinyl & Rubber Cleaner/Conditioner topped with Gold Class Trim Detailer.
7. Interior got an All Purpose Cleaner wipedown, a simple vacumm and dressed with #40 - Vinyl & Rubber Cleaner/Conditioner.
It looks too good to go offroading now.
Process:
1. Wash with Gold Class Car Wash Shampoo & Conditioner
2. Clay with Smooth Surface Clay Kit and Quik Detailer (Trigger)
3. #80 - Speed Glaze on the G110 with a SoftBuff 2.0 Polishing Pad
4. NXT Generation Tech Wax 2.0- by hand.
5. Tires got Hot Shine High Gloss Tire Spray
6. Fender flares and vinyl/rubber pieces got #40 - Vinyl & Rubber Cleaner/Conditioner topped with Gold Class Trim Detailer.
7. Interior got an All Purpose Cleaner wipedown, a simple vacumm and dressed with #40 - Vinyl & Rubber Cleaner/Conditioner.
It looks too good to go offroading now.
Did you wipe down the vinyl top with anything or how did you clean that?
TOP
Comment