Presidential Detailed: 600+WHP SUPRA-COBRA IRS

[Presidential_Detail]

I had a slew of cars thrown at me over the last couple weeks from SR Performance. I do a lot of work for them once they are finished with the mechanical fix ups. This car in particular is their shop car theyve had for a few months now. This car has a GIANT single turbo setup with a built auto tranny(not familar with the exact model-maybe turbo 400??) and also is equipped with a full COBRA IRS rearend. Doesnt hurt to make 600+WHP and never fall out of boost with the auto!! Its like a rocket when you peg it! There is no doubt it is definitely a fast car, but it definitely needed some exterior loving!!!!

When I first started, it was covered in dust and sand so I had to be very careful washing it.

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

I started with the hood to see where I was going to stand, it had a fairly hard clear and I ended up having to use a Burgandy wool with M105 using the KBRM to remove the defects. This was not a factory paint, nor a good quality one, but I was able to clean it up pretty decent for what it was.

BEFORE




Can you say Brillo pad??




Now can you say VOILA!!








And finally, the entire hood finished.

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

I then moved onto the rest of the car using M105/Burgandy, M105/Polishing Pad, and M205/Finishing Pad.







After compounding only..








Fender Corrected/Door Uncorrected.

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Before..


After Compounding Only..


Before.


50/50.


After Compounding Only..




Rear Wing, which we actually decided to leave off! haha!


50/50.




A few more pics in the halogens after compounding.
Roof.




And yes, that is a 4" straight through exhaust NO MUFFLER, it sounds incredible!

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

These were the best sun shots I could get..










And a few final reflection shots..
Here is my est. 2400whp shot. (Supra-600whp/Viper-Twin Turbo Fully Built Estimated at 13-1500whp/350Z Twin Turbo-500whp)

[Zuke]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Amazing work as always!

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Thanks!

[Fischer]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

On the last pic I was about to ask if those were bird droppings but from the looks of it they are the lights. Looks awesome.

Went to a dull red to a pure wet red.
Great job.

[Tom Weed]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Hey awsome job as always for you, I'm always impressed by your posts... You said you used the KB method, was it using a rotary, flex or G100 or G110?

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

On the last pic I was about to ask if those were bird droppings but from the looks of it they are the lights. Looks awesome.

Went to a dull red to a pure wet red.
Great job.

Haha! I see what you mean, they are actual roof vent fans.

[Megafast13]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Also Looks Spectacular.

Put the wing back on though.

That exhaust looks rediculous

[J. A. Michaels]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Well if it was not a expensive Paint job, when you were done with it it looks like it is.
Great work as always. The car looks awesome.

[Tuck91]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

That red is glowing, nice job!

[Presidential_Detail]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

Thanks guys!

[Mr Mustang]

Re: Presidential Detailed: 600+WHP SUPRA-COBRA IRS

looks great, but that exhaust pipe sticking that far out looks pretty stupid