hey guys..
friday was a day off and i decided to work a little in my car! since i bought this car about a 2 months ago, after i totalled my WRX jpn spec
lets talk about of the car: many swirls,acid rain and a little scratchs.
products used:
2 bucket method without grit guards(don't have in brazil)
washmitt
hyperwash
super suede drying cloth
clay + QD
#83 + cuting pad
NXT 2.0 by hand
tomorrow i will use UQD
first i snow foam with my karcher foam gun + HP

clayed the car with QD

dry off, put the car inside to see the defects in the paint
the roof, lots of acid rain and swirls

the hood,acid rain and swirls

basic the entire car was acid rain and swirls.
note: in my city don't have any meguiars dealer and no one make this "little job"..only the basic, wash and wax...and wax off poor quality, so im the only to do this job here!
taped the car (don't have 3m blue tape
)

corrected:
hood

right fender

right door

roof

well! so i corrected everything that i can, minor scratch appear but i don't have scratch-x , tomorrow i expected that arrive here!
so after all this i aplly a coat of NXT 2.0 by hand , wipe off after 30mins. and let the car sleep, after 12hrs (yes, im a car crazy
) i apply a 2nd coat of NXT, after 1 hour i wipe off and finish my 3 days service 
hood

roof and my mom saying "hi mol"

right door

a little of dirt in top bottom, later i will remove this.
note 2: in brazil don't have many products like USA and europe. so i pay too much for a product there is cheaper in USA.
i tried do the best, this is the 3rd car that i make.
a hope the MOL enjoy my detailing, my body is tired,my fingers is gone and im very happy after 3 days of work. ( not entire 3 days)
see ya
friday was a day off and i decided to work a little in my car! since i bought this car about a 2 months ago, after i totalled my WRX jpn spec

lets talk about of the car: many swirls,acid rain and a little scratchs.
products used:
2 bucket method without grit guards(don't have in brazil)
washmitt
hyperwash
super suede drying cloth
clay + QD
#83 + cuting pad
NXT 2.0 by hand
tomorrow i will use UQD
first i snow foam with my karcher foam gun + HP

clayed the car with QD

dry off, put the car inside to see the defects in the paint
the roof, lots of acid rain and swirls

the hood,acid rain and swirls

basic the entire car was acid rain and swirls.
note: in my city don't have any meguiars dealer and no one make this "little job"..only the basic, wash and wax...and wax off poor quality, so im the only to do this job here!

taped the car (don't have 3m blue tape


corrected:
hood

right fender

right door

roof

well! so i corrected everything that i can, minor scratch appear but i don't have scratch-x , tomorrow i expected that arrive here!
so after all this i aplly a coat of NXT 2.0 by hand , wipe off after 30mins. and let the car sleep, after 12hrs (yes, im a car crazy


hood

roof and my mom saying "hi mol"


right door

a little of dirt in top bottom, later i will remove this.
note 2: in brazil don't have many products like USA and europe. so i pay too much for a product there is cheaper in USA.
i tried do the best, this is the 3rd car that i make.
a hope the MOL enjoy my detailing, my body is tired,my fingers is gone and im very happy after 3 days of work. ( not entire 3 days)
see ya
Comment