Tweet
This is my first post on Meguiar's forum. I thought since I used a couple Meguiar's products this might be interesting. This is only after pictures, didn't intend to post this when I started.
Process:
Wash: Optimum No Rinse
Clay: Clay Magic Blue Clay
Paint: Flex 3401
Meguiars 105 with orange CSS pads when needed, but mostly LC white pads.
Menzerna FP II on LC gray pad.
For some reason this combo did not work well on the hood. I ended up using SIP on an orange CSS pad and then 106FF on a white LC pad. Worked pretty good.
LSP: Meguiars #16. This went on easier than I expected. A little friction turns it into a liquid and if not used too heavy it wipes off easily.
Overall I got about 90% of the defects removed. Most everything left were RIDS which even 105 on orange did not touch. I will live with them.
Pictures:
Living in a small town I was fortunate to pick up Meguiars 16 for 14.88 per can.
Process:
Wash: Optimum No Rinse
Clay: Clay Magic Blue Clay
Paint: Flex 3401
Meguiars 105 with orange CSS pads when needed, but mostly LC white pads.
Menzerna FP II on LC gray pad.
For some reason this combo did not work well on the hood. I ended up using SIP on an orange CSS pad and then 106FF on a white LC pad. Worked pretty good.
LSP: Meguiars #16. This went on easier than I expected. A little friction turns it into a liquid and if not used too heavy it wipes off easily.
Overall I got about 90% of the defects removed. Most everything left were RIDS which even 105 on orange did not touch. I will live with them.
Pictures:
Living in a small town I was fortunate to pick up Meguiars 16 for 14.88 per can.
Comment