Tweet
This is my 2000 Integra GSR that I detailed this past weekend. This is my first work with the PC7336 and I used the pad that came with it (I know, I know) Process is below
Wash/Dry (2 bucket)
Clayed with Megs Clay Bar
taped off car
SFX-2 by PC @ Spd 5
SFX-3 by PC @ Spd 5
Megs M21 by PC @ Spd 3
Removed M21 by hand w/ Megs Microfiber
Wheels got clayed and M21
No before pictures since it wasn't too bad (at least I thought so until I saw the end results) Also I can't rave enough about the M21. This stuff has made my car look better than ever (literally) and made my pearl pop like never before. Thanks Meguiars.
Driver's side reflection shot (off the door)
Passenger side reflection (door)
Passenger side reflection again
A shot of the pearl and lack of swirl marks
A reflection shot of myself
Let me know what you think.
Wash/Dry (2 bucket)
Clayed with Megs Clay Bar
taped off car
SFX-2 by PC @ Spd 5
SFX-3 by PC @ Spd 5
Megs M21 by PC @ Spd 3
Removed M21 by hand w/ Megs Microfiber
Wheels got clayed and M21
No before pictures since it wasn't too bad (at least I thought so until I saw the end results) Also I can't rave enough about the M21. This stuff has made my car look better than ever (literally) and made my pearl pop like never before. Thanks Meguiars.
Driver's side reflection shot (off the door)
Passenger side reflection (door)
Passenger side reflection again
A shot of the pearl and lack of swirl marks
A reflection shot of myself
Let me know what you think.
At first glance it appeared your wheels were dirty but I looked closely and I saw that their gunmetal. The contrast between the center machined area and the gunmetal spokes threw me off. LOL
Comment