Hey everyone,
Here is a detail I did on my truck. It's not really "extreme" but I thought it's worth sharing.
I bought this 1996 Toyota Tacoma Sport from my neighbor last fall. The truck had less than 100K miles and was in decent mechanical shape but looked like total ****.
It had never been waxed and was faded & oxidized.
Anyway, I got busy on it and fully detailed the thing inside and out right away. I haven't had time to post pics and do a write-up till now.
**Detailing Process**
First, I drove to a car wash and pressure washed everything: body, underbody, wheels/tires, wheelwells, bed, engine, ect...
Next I removed the decals from the glass with a razor blade and scrubbed the glass with steel wool before appling rainX.
When I hand washed the truck the washwater actually turned as white as milk from the oxidation. Yummy.
After washing I used a clay bar to smooth the finish before waxing.
To clean, polish, and protect, I used Meg's Deep Crystal trio.
To make the underbody and wheelwells look new again, I spray painted them with some cheapo black paint.
The wheels had so much baked-on brake dust I had to use rather extreme measures: WD-40 and lots of steel wool.
I used Meg's Endurance to shine the tires and Gold Class Trim Detailer to do the mudflaps, trim, and door seals.
Once I bought the PC I used it with DACP finish bringing the paint back to life.
Well, that is about all I remeber doing for the exterior. For the inside, I detailed everything and even took the seats out. No after pic yet though.
Anyway, here are the results.....
Before
After
Before
After
Before
After
Here are some more after shots....
Rock on Meguiar's!
Here is a detail I did on my truck. It's not really "extreme" but I thought it's worth sharing.
I bought this 1996 Toyota Tacoma Sport from my neighbor last fall. The truck had less than 100K miles and was in decent mechanical shape but looked like total ****.

Anyway, I got busy on it and fully detailed the thing inside and out right away. I haven't had time to post pics and do a write-up till now.
**Detailing Process**
First, I drove to a car wash and pressure washed everything: body, underbody, wheels/tires, wheelwells, bed, engine, ect...
Next I removed the decals from the glass with a razor blade and scrubbed the glass with steel wool before appling rainX.
When I hand washed the truck the washwater actually turned as white as milk from the oxidation. Yummy.

After washing I used a clay bar to smooth the finish before waxing.
To clean, polish, and protect, I used Meg's Deep Crystal trio.
To make the underbody and wheelwells look new again, I spray painted them with some cheapo black paint.
The wheels had so much baked-on brake dust I had to use rather extreme measures: WD-40 and lots of steel wool.
I used Meg's Endurance to shine the tires and Gold Class Trim Detailer to do the mudflaps, trim, and door seals.
Once I bought the PC I used it with DACP finish bringing the paint back to life.
Well, that is about all I remeber doing for the exterior. For the inside, I detailed everything and even took the seats out. No after pic yet though.
Anyway, here are the results.....
Before

After
Before
After
Before
After
Here are some more after shots....
Rock on Meguiar's!

Comment