Hard Work Results not 56k Friendly!

[rusty bumper]

Originally posted by rahula
Conclusions:

However the products overlap a lot on their functionality and IMO opinion they need to simplify the choice a little. The products themselves are not clear what purpose they serve or what differentiates them from the other products of similar types.

Finally I think the instructions for using the products need to be expanded. It would be very helpful if the DA settings, pad choices and what how long a product should be worked. It would also be very helpful if each product described exactly what each is meant to resolve rather than some major confusion between the products as I have stated earlier.

I agree with you on the need for better instructions. Until I found these web sites (Show Car Garage & MOL), sometimes it was hard to figure out what to buy and how to use it.

For example, one thing that puzzles me, is that on a lot of Meg's bottles, it says to use a piece of terry cloth towel to apply the products with, but it doesn't even mention anything about their Hi-Tech foam hand applicators.
I even never knew they exsisted until a few years later, when I stumbled into them by accident...They made hand application a lot easier (Especially with #7 polish).

But on the other hand, I think Meguiars is starting to realize this by creating this great help forum, what with the power of the internet and all.

Special thanks to Mike, Lynn, & Tim (And others) for helping to educate us all!

EDIT: Forgot to make mention of your car rahula...Looks great to me!

[screemingtp]

Where are the pics I cannot see them

[Mike Phillips]

Originally posted by screemingtp
Where are the pics I cannot see them

The disk drive that contains all of the data for Meguiar's Online suffered a fatal crash two weeks ago and we lost approximately 1 weeks worth of,

* Members
* Photos
* Messages

Unless the original member re-uploads their pictures back into the gallery, the pictures will not show up.

This is very time consuming. Some people will, while others will probably not. For me, I have to upload approximately 60 photos that were lost due to the disk drive crash.

Computers... the good, the bad and sometimes... the ugly!

Mike

p.s.

Did you read the information I posed for the [b]rotary hop question you posted in Detailing 101

[gemini101]

[QUOTE]Originally posted by rahula
[B]After I applied #83 DACP twice for a test and these are the results:
What Dewalt are you using for a DA ?????
Just curious as im debating ordering a P.C from the states,but im having probs with voltage,rewiring.

[rahula]

Originally posted by screemingtp
Where are the pics I cannot see them

Edit: The pictures on this server were lost recently and because the system here to upload eveything is too tedious I'll link you to

http://www.rsharma.co.uk/clio.htm

which has a copy of this thread with all the pics.