My own NXT vs. NXT 2.0 Experiment.
Before:

Note water spots:

NXT Wash + Microfiber Mitt:

Water Beading (or lack of beading) Before:

Golf Class Bug and Tar Remover on tar stain:

Spray on and leave for 30 seconds:

Tar easily removed:

Ater wash. Looks ok but upon closer inspection:

Water marks still visible:

NXT will be applied on the left portion of the hood while NXT 2.0 on the right:

Bosch GEX-270AE ROB + W9006:

The slight cleaning power of the NXT and NXT 2.0 was sufficient to remove the water spots and both left a nice finish.
UQD + Microfiber towel:

After waxing I decided to spray UQD on the lower half of the hood (towards the front of the car) and left the upper half as is. The top left is NXT w/out UQD. Bottom left is NXT w/ UQD. Top right is NXT 2.0 w/out UQD and bottom right is NXT 2.0 w/ UQD.


I will try and evaluate the effectiveness of NXT and NXT 2.0 with and without UQD during the next couple of weeks. Will post some pictures taken after a rain shower last night.
Before:
Note water spots:
NXT Wash + Microfiber Mitt:
Water Beading (or lack of beading) Before:
Golf Class Bug and Tar Remover on tar stain:
Spray on and leave for 30 seconds:
Tar easily removed:
Ater wash. Looks ok but upon closer inspection:
Water marks still visible:
NXT will be applied on the left portion of the hood while NXT 2.0 on the right:
Bosch GEX-270AE ROB + W9006:
The slight cleaning power of the NXT and NXT 2.0 was sufficient to remove the water spots and both left a nice finish.
UQD + Microfiber towel:
After waxing I decided to spray UQD on the lower half of the hood (towards the front of the car) and left the upper half as is. The top left is NXT w/out UQD. Bottom left is NXT w/ UQD. Top right is NXT 2.0 w/out UQD and bottom right is NXT 2.0 w/ UQD.
I will try and evaluate the effectiveness of NXT and NXT 2.0 with and without UQD during the next couple of weeks. Will post some pictures taken after a rain shower last night.
Comment