• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

I'm the new guy from Tennessee.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I'm the new guy from Tennessee.

    I have used a few Meguiar's products in the past. I have used a couple polishes by hand and the NXT wax, but I just started looking into really learning how to take care of cars properly. As I was researching and seeing posts about DA polishers, I stumbled onto a deal on 2 Meguiar's G110v2. Now I am signing up to start asking questions and learning how to use this polisher. I'll plenty of questions as I only have the polishers without any accessories at the moment. Mine came with the Meguiar's 6" backing plates, but I have heard the 5" plates are better. I also heard great things about the 5.5" flat pads. I'll do some more researching before making a purchase for backplate and pads.

    Anyway, I'll be posting questions soon enough.

    Take care.
    Tech Diver

  • #2
    Re: I'm the new guy from Tennessee.

    Welcome to Meguiar's Online! Our D/A Buffing 101 thread is a great write up for general information and technique on how to use a Dual Action Polisher like our G110v2
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

    Comment

    Working...
    X
    gtag('config', 'UA-161993-8');