• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

First Post with first question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • First Post with first question

    Hello everyone. I just purchased my g110v2 with pads and some products. Due to owning a Vivid Black Harley Davidson i have some minor scratches and minor swirl marks in my paint. This bike almost seems to scratch if i look at it to long.

    My question all of you is what order should I apply these products. Scratchx 2.0, ultimate compound, ultimate polish, and speed glaze ? I have ultimate wax as well. That I know is last. Thank you for your input and I look forward to being a member of this forum..

    I just posted this question in detailing 101..

  • #2
    Re: First Post with first question

    1. Wash
    2. Clay
    3. Clean - What are you working on? What condition is it in? You cna do a test spot with Ult. Polish, see if it helps. If not, go to the UC. Can follow up the UC with Ult. Polish then.
    4. Wax
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #3
      Re: First Post with first question

      the service manager at my work just bought a harly and there was scratches on the fiberglass saddle bags and i can feel the scratches with my finger nail so i told him to lightly sand the scrach then use compound then polish then wax.
      1984 buick grand national 1987 engine

      1989 gmc s15 jimmy 4x4 winter beater

      Comment

      Your Privacy Choices
      Working...
      X