Owners manual for Meguiar's G-100

[PREACHERGLENN]

I need an owners manual for a used Meguiar's G-100 Dual Action Polisher.
Just bought this from an estate sale, and I don't know what size backing plate to use. Help!!

[Nappers]

Re: Owners manual for Meguiar's G-100

If you give me a day or two to scan my G100 I can upload and let you see the pix.....

Or....

The older W64DA, W67DA for the older soft buff pads, it measures roughly 4 7/8" across and used for 6 1/2" pads or so.....

The new W68DA is for the new soft buff 2.0 pads which are if memory serves 7" wide....

The first two backing plates can be used with smaller pads but I wouldn't go smaller than 5 1/2" pads with those.

The thread is 5/16" for the G100.

Hope that is clear as mud!

[Andy M.]

Re: Owners manual for Meguiar's G-100

If you can't get it here maybe try Porter Cables web site. It is essentially the same buffer, just rebadged.

Andy M.

[jfelbab]

Re: Owners manual for Meguiar's G-100

http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/Porter-Cable/A21935,7335.pdf

http://www.dewaltservicenet.com/Products/DocumentView.aspx?productid=49536&typeId=11339&documentId=30472

[roushstage2]

Re: Owners manual for Meguiar's G-100

If you need a backing plate, just pick up the one from ADS. Works good too!