"The second step"

[mwaddell21]

I have a mobile detail company and am doing quite well. My question is what is the best product to use after I've compounded a vehicle with the Diamond Cut product from Meguiars. What is the best product to use after that to bring out the luster and clean up any swirl marks, especially on darker autos.

[Mike Phillips]

Re: "The second step"

Welcome to Meguiar's Online!

Here's the link to the Detailing 101 forum which is a great catch-all forum and if you don't know which of other forums to post your questions then Detailing 101 is always perfectly acceptable


Detailing 101


Thanks!


Here's the nutshell answer...
Assuming you're using a rotary buffer for the first step and the second step then probably M83 or M82 with a foam polishing or finishing pad.

Have you heard about or tried our new M105 Ultra Cut Compound? Or about our new M205 Ultra Finishing Polish?

If not you might want to give the M105 a try and it's available now through any PBE store and M205 should be becoming available any week now.

Click on the pictures for more information.

M205 Ultra Finishing Polish & M105 Ultra Cut Compound now for DA Polishers!

[Mike Phillips]

Re: "The second step"

If you do a lot of machine buffing you might want to check into our new washable foam pads...

Washable 7" Soft Buff 2.0 Foam Pads

[Mikejl]

Re: "The second step"

to Meguiar's Online!

Mike

[J. A. Michaels]

Re: "The second step"

Hello and welcome to mol.

[Andy M.]

Re: "The second step"

Welcome to MOL!

Andy M.