I am new and I just wanted to say hi to everyone.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
william938
Collapse
X
-
Re: william938
Hello William and welcome to MOL!
Andy M.Keeping MOL family friendly! If you need help or have a question, don't hesitate to shoot me an email or PM. 101impala@gmail.com
Andy M. Moderator
-
Re: william938
I need alittle help here everyone and I hope you guys can help. I have been working on a MGB Roadster and I painted the whole car Yellow. The paint went on great. After that I clear coated the car and color sanded the finish. I sanded it all the way down to 4000 grit. then polished it out for a show car finish. The car looked like that wet look but in some places I can see under the shine little tiny pin holes like skin pores. I was wondering if I need something for these tiny little pore holes.
Can anyone help?
Thanks
Bill
Comment
-
Re: william938
Welcome to Meguiar's Online!! Read through the threads below to get you started.
Basic List O' Links
List O' Links 2.0
Meguiar's Online Database
RyanAttack life, it's going to kill you anyway.
This is your life. Choose to live it to the fullest.
Comment
-
Re: william938
Bryan Hi thanks for the reply.
I never even waxed it yet. All I did was spray the clear and color sanded it then polished it. I was using 3 M for the polishing. I also have tryed some Meguiars polish to help[ but the same thing. These are very very tiny. Almost like a little pin mark.they are as small as pores in our skin.
I hope that will help.
Comment
Comment