I'm self schooling on auto painting. Starting with a very low budget project to try and work the kinks out before I unleash myself on cars and bikes!
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Getting started
Collapse
X
-
Re: Getting started
Thanks! Truthfully I've been reading a lot of online info and realized there are about 6 gazillion methods of painting, sanding, buffing and polishing. Hopefully this forum will unscramble my head. I'm sure it's my fault for just being so anal about turning out a perfect project. So where is the best place to go in here to get some ROOKIE questions answered?
Comment
-
Re: Getting started
Welcome to Meguiar's Online!
Originally posted by New2it View PostSo where is the best place to go in here to get some ROOKIE questions answered?
Have Questions? Looking for Answers?IF you were to read every thread in just the "Hot Topics" forum you would know more than most detailers and painter's helpers that are not online learning from detailing discussion forums.
So much good, practical and helpful information in these two forums
Hot Topics
How To Articles
List O' Links 2.0
If you're moving up to machine polishing, be sure to read the below thread before starting...
Tips & Techniques for using the G110, G100, G220 and the PC Dual Action Polisher
(These are all similar tools)
Currently there are 4 pages of threads in the "Hot Topics" forum with up to 30 threads on each page.
If you're unsure as to how to navigate between pages in a thread basically you want to look for the little numbers at the top and bottom of each thread and these numbers represent the pages of the thread. Here's a picture,
Comment
-
Re: Getting started
Welcome to MOL!
Andy
101impalaKeeping MOL family friendly! If you need help or have a question, don't hesitate to shoot me an email or PM. 101impala@gmail.com
Andy M. Moderator
Comment
Comment