Tweet
I have a meguiars mt300 and i buy a 3 inch back plate. I dont find foam polish pads fits on it. Someone use the pad going on the da power system...? Any idea ? I dont want microfiber one. Thanks !
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Meguiars mt300
Hi yes, our 4 Inch Pads under the D/A Power System Line is what we use & recommend for our MT300 with a 3 inch backing plate. G3507, G3508, G3509. Check this article out:Originally posted by cedgel View Post
D/A Polisher Basics with Meguiar's MT300Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com -
Re: Meguiars mt300
Thanks !Comment
-
Re: Meguiars mt300
Did the red foam is good with any meguiars conpound ? Unltimate, 105 101 ?Comment
-
Re: Meguiars mt300
Yes, provided you are using either a separate or clean pad.Originally posted by cedgel View PostNick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.comComment
-
Re: Meguiars mt300
How did this polishing go?Comment
Comment