Hello,
I wanted to erase some scratches due to bumping car door and others on my car doors, so I used Meguiar's Scratch X 2.0, that I applied on clean car (high pressure car wash), cold bodywork, in the shade, with a proper applier (by hand) and a microfiber, without putting too much pression on it.
On one side of the car, everything was ok, but on the other one, especially on the upper zone of the car door where I used the polish, it resulted that some white impacts appeared.
I didn't notice it immediately, although I thoroughly and closely looked at the result of polishing (with the flash of my smartphone, and then under the sun, but the car was put under the sun only hours after finishing the polishing).
I noticed it after a one-hour car ride.
My question is : can the polish be responsible of it, in spite of all the precautions I took ? I know polish can leave traces or micro scratches, but impacts ??
Can it be existing impacts that got more visible with the polish getting into it ? Could polishing weaken the glaze that got more sensitive to gravels on the road ?
Here you have the photo.
Thank you.
I wanted to erase some scratches due to bumping car door and others on my car doors, so I used Meguiar's Scratch X 2.0, that I applied on clean car (high pressure car wash), cold bodywork, in the shade, with a proper applier (by hand) and a microfiber, without putting too much pression on it.
On one side of the car, everything was ok, but on the other one, especially on the upper zone of the car door where I used the polish, it resulted that some white impacts appeared.
I didn't notice it immediately, although I thoroughly and closely looked at the result of polishing (with the flash of my smartphone, and then under the sun, but the car was put under the sun only hours after finishing the polishing).
I noticed it after a one-hour car ride.
My question is : can the polish be responsible of it, in spite of all the precautions I took ? I know polish can leave traces or micro scratches, but impacts ??
Can it be existing impacts that got more visible with the polish getting into it ? Could polishing weaken the glaze that got more sensitive to gravels on the road ?
Here you have the photo.
Thank you.
Comment