Cleaner wax application help

[YUSUF_1977]

hi guysfficeffice" />

i have just ordered Meg cleaner wax which i think should be a 1 step solution for my red car which described in

http://meguiarsonline.com/forums/showthread.php?t=41190

i have new microfiber cloths and i will apply it with as below

1.wash the car
2.apply with a microfiber cloth 30 cm x 30 cm area.
3.let it dry for 3-4 minutes
4.clean it with another clean microfiber.


please advise anything wrong?

[Murr1525]

Re: Cleaner wax application help

Try to make sure the cloth is folded over as you apply.

The applicators are kind of spongy to help even out the pressure from your hand, so try to do the same with a cloth.

[J. A. Michaels]

Re: Cleaner wax application help

Instead of just making a blanket statement of removing wax after 3-4 minutes. May I suggest doing the "Swipe test". This way you will be sure that the cleaner wax is completely dry.

[YUSUF_1977]

Re: Cleaner wax application help

thanx for the replies swap test learned and applicator is ready .

[deepstuff]

Re: Cleaner wax application help

So how is it applied? Is it just spread on, let dry, and whiped off? Should there be some buffinf involved? If so when? Is this best done with a machine or by hand?

I tried it once today but my paint doesn't feel like it was freshly waxed?

THanks!

[Shawn T.]

Re: Cleaner wax application help

Don't work it like you would Swirlx, Scratchx 2.0 or Ultimate Compound. Give it a little work and then move on. It can be accomplished by machine or by hand. It is really a personal preference. Machine application may allow you to work the product more but it really is a personal choice.

[deepstuff]

Re: Cleaner wax application help

So work it as its being applied but not too much?

[Shawn T.]

Re: Cleaner wax application help

That sounds about right.