• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Car Wax Removal! Help Please!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Car Wax Removal! Help Please!

    i also need to remove the wax from auto glym turtle etc before i start so i got some work ahead of me, just need a structure

    Comment


    • #17
      Re: Car Wax Removal! Help Please!

      The clay and paint cleaner will remove previous wax from the surface just fine. As for the process, there are MANY threads on this. Take a peek around and see what you can find. On the main MOL page, the 5 step process has it's own link IIRC.

      Comment


      • #18
        Re: Car Wax Removal! Help Please!

        Based on what you wrote I would think that the Pinnacle Paintwork Cleansing Lotion is exactly what you are looking for. It removes any waxing the paint might have without hurting the paint and without re-adding any kind of waxing to your paint. A real surface prep. I would still clay the surface first.

        Or simply using the Meguiar's clay bar with the Quick Detailer that comes with the kit would probably do the trick.

        Comment


        • #19
          Re: Car Wax Removal! Help Please!

          Repainting requires the substrate, in this case the chipped surface, to be clean and free of grease, oils, waxes, silicones, etc to ensure proper bonding of the new coat. Dupont makes a product specifically formulated for this called; Prep-Sol. this will clean the area to ensure none of the contaminates remain allowing the new primer and paint to properly bond.
          BobbyG

          Comment


          • #20
            Re: Car Wax Removal! Help Please!

            Originally posted by fingermouse1831 View Post
            ill try and keep it brief, i have checked forums without success...
            so here goes, i have a vw bora need to keep it clean and want a stunning finish.
            i need to buy new meguairs products
            i have clay and quick detailer, but am waiting on 7 show car polish, 26 or 16 wax, scratch x to remove swirls plast x for dull headlights. this will all be done by hand as i have no machinebuffer. question is, i dont seem to know best way to start? should i use deatailer and clay before scratch x or after and then show car no.7 then 26 and then 16? some assistance in the best order to use these products would help. i need to clean car remove the scratches and then polish up to a deep glossy shine. help greatly recieved the order and what to use.
            Wash => clay => SwirlX => #7 => wax. Both clay and SwirlX will remove previous wax layers.

            Comment

            Your Privacy Choices
            Working...
            X