Tweet
I am slowly learning the DA but with my WS6 I just like to do it by hand keeps me close with the car and the power in my hand. So here is my question The car is clean as it sits today but I want to try some different product then the last time. Here is what I want as an end result(all doing by hand) Swirl free high gloss looking like the car is still wet. Now with that said I understand a pure polish will help with the wet look. Here is what I was thinking wash, claybar, swirlX, glaze#7, tech 2.0 The only question is, is #7 the right polish to use by hand or is there something else that will yeild the same results and easier to use by hand?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: 2001 WS6 with elbow grease
M07 is a very good product, but sometimes when used with the wrong technique it can get very frustrating.
Sometimes I would suggest M81 over M07, it can delivery very similar results, I think M07 is still better, but you rarely you would have trouble removing it.
Still M07 is a very good product, and here at MOL there is a lot of information regarding M07, some techniques, information about the product so if you want to go with it just do some searching and read about how to apply/remove it and you won't have any problems if you follow them
Comment