whats the best way to remove pin stripes off of you car ?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Pin stripes
Collapse
X
-
Re: Pin stripes
Use a heat gun to get the stripe hot... you dont want the metal to get say over 140 degrees... this will soften the glue on the underside, peel up one edge and it will just come right off... Remove excess left over glue with 3M adhesive remover... OR
You can set it in the sun and let it get hot and pull the tape... either way, it wont take long to pull the stripe.. If it is cold where you are at, then use the heat gun.. you can work a 6 inch section at a time if not moreKing of Bondo
-
Re: Pin stripes
Originally posted by 94BMW325CIS View PostI would use a very sharp plasitc razer blade and be very carefull.
Look over on ADS, they have a pinstripe and decal removal kit...Attack life, it's going to kill you anyway.
This is your life. Choose to live it to the fullest.
Comment
-
Re: Pin stripes
On a painted pin stripe, I personally would use #80 or #83 on the PC (since that's what I have lol). It would probably remove painted pin stripes fine unless they were actually painted at the same time as the rest of the car, and clear coated over (I don't know if they even do that, but if they do I have no idea how to remove ones like that). I've been working on a motorcycle trailer recently with painted on pin stripes, and #80 removes them unless I just go really lightly over them.Lydia's Mobile Detailing
Professional Detailing since 2007
1997 Dodge Dakota SLT V8 - Green
2007 Honda ST1300 - Silver
Comment
Comment