Tweet
It's a DA sander that hooks up to a hose and feeds water through the sander. It doesn't say how long the throws on it are though. There's a finishing sander I found with 3/32nds throw but there's no water feed.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
It's a DA sander that hooks up to a hose and feeds water through the sander. It doesn't say how long the throws on it are though. There's a finishing sander I found with 3/32nds throw but there's no water feed. -
never used one, but it looks like a nifty tool -
I've used a pneumatic DA sander for wet sanding but not with a water feed.
It's preferable to use a diluted soap solution for sanding rather than straight water. If you wanted to do that you'd have to rig the supply with a reservoir or inline mixer.
I would guess that most users of such tools are in production environments and don't bother with the soap, either compensating in other processes or just accepting the results.
PC.Comment
Comment