Need advice for oxidation removing of a fiberglass camper polishing

[gphoto120]

.
I will be doing a two or three stage restoring of an oxidized fiberglass camper we just bought. I have the Meguires 3 stage rv restoration kit ( oxidation remover, high gloss polish, wax) I want to start on the roof and go down from there. Is it best to use the oxidation remover on small areas of the roof , then apply the polisher immediately after or can I do the entire roof with compound and wait a day or two to do the next polisher stage? The camper will be outdoors in the shade.
Thanks for any suggestions

[Nick Winn]

hi gphoto120,

a couple days in-between steps is not going to be a huge concern or problem, however you will need to clean the area again with either a quick detailer spray like our #M52 Marine/RV Quik Detailer or Wash the vehicle again depending on how dirty it gets.

[gphoto120]

Thank you Nick !