Tweet
I think to purchase an adapter for w5000 that has a m14 thread attaching to 5/8 threaded woolen pad
is this thread too long for w5000 to fit
is this thread too long for w5000 to fit
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: adapter for double sided pad
It's hard to say for sure if the threads on that adapter are too long for the W5000 pad, but it sure looks like a standard adapter used with double sided pads. Do you have a measurement of the length of the threaded area?Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
-
Re: adapter for double sided pad
That does seem too long, because I remember the W5000 thread hole has three threads in it.
Here's a picture:
[img]http://archive.meguiarsonline.com/fo...Adaptor006.jpg[/img]
Comment
-
Re: adapter for double sided pad
It would appear tp be too long as the W-5000 pad does have 3-4 threads and so do the 3M adpaters. I would place a nut on the thread to take up some of the threads just to make sure that it does not protrude out the pad's center.
TimComment
-
Re: adapter for double sided pad
thanks for all the helps
the seller indicates that it is fine with the 3m and gpi double sided pads but not know the meguiars' one. Does 3m or gpi has a longer thread than meguiars on the padComment
Comment