am considering purchasing the makita 9227CX3. i would like to continue to use the megs 6.5 pads with the rotary. it is my understanding that the backing plate that comes with this makita will not work with the megs pads. what do i need; just the w-64 or is an adaptor also needed ? how does the w-64 connect to the makita; it just screws on ? thanks
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
what do i need ?
Collapse
X
-
Re: what do i need ?
Originally posted by beefy z View Postam considering purchasing the makita 9227CX3. i would like to continue to use the megs 6.5 pads with the rotary. it is my understanding that the backing plate that comes with this makita will not work with the megs pads.
what do i need; just the w-64 or is an adaptor also needed ?
Yes, all you need is the W64 Backing Plate
how does the w-64 connect to the makita; it just screws on ?
Yes, the original one will unscrew and you can screw on the new smaller one and then tighten till it's snug.
thanks
Here's the link,
W64 Rotary Buffing Backing Plate
Comment