Tweet
I have tried to use my G110 with regular generators and it does not work, it does not change the speed , if I start the G110 on speed 1 it barely moves, but if I start it on speed 6 it goes fast but when I tried to change to a lower speed it does not change. This problem doesn't happen when I plug it to a wall outlet or a inverted generator, I have tried this with 3 or 4 regular generators and same thing always happen.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Problems with Meguia's G110 and regular generators
What's the rating of the generators? Are you using too long and too light of an extension cord? Have you flipped the switch on the generator to make it run on fast idle - full speed, rather than slow idle and it accelerates when you switch on the buffer?
"fishing for swirls in a sea of black"
~~~~~~~~~~~~~~~~~~~~~~
David -
Re: Problems with Meguia's G110 and regular generators
"What's the rating of the generators?" regular generator 4000 watts, 20 amp, inverted generator honda eu2000,.
Are you using too long and too light of an extension cord? This happen even when is plug directly to the generator.
Comment
-
Re: Problems with Meguia's G110 and regular generators
...and it works okay when ya plug it into a 'regular' wall outlet?
BillComment
-
I actually have the same problem with a husky 3750 watt gen. Its not a power problem because the gen will run my extractor with dual vacs and heater no problemEven the best cars look like junk when they are not cleanComment
Comment