Tweet
I have a Meguiar's G110v2 dual action multi speed polisher. It was a gift and hasn't been used on my car yet. I was wondering however if this could also function as a sander (with the right pad of course) for sanding off old wooden cabinets and refinishing them ? If so is there a recommended pad and speed setting
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Can the G110v2 be used for sanding cabinets as well
I don't see why not. The original Meguiars G100 was a re-purposed Porter Cable 7424, which was designed for sanding, not car polishing. You should be able to use the G110v2 for sanding with the proper backing plate, but I would wait on a more authoritative answer from one of the mods or admins. -
-
Re: Can the G110v2 be used for sanding cabinets as well
If it can be used what pad and speed setting should I select ?Comment
-
Re: Can the G110v2 be used for sanding cabinets as well
You wouldn't use a pad. You would need to buy an aspirated velcro backing plate (the one with 5-6 holes)Originally posted by richfei View Post
and sanding disks of various grits. be sure to buy the correct diameter to match your backing plate.
As for the speeds, you can probably run a search for an owner's manual on Porter cable's website.
Their polishers are still sold as sanders and they would likely have speed setting recommendationsComment
Comment