can i use m105

[dragan]

can i use or is it good to use M105 on yellow pad whit gv220 to remove swirls and scraches and on what speed?
and after i can use m205 for finish?

[Marc08EX]

Re: can i use m105

Yes you can use that combo. People usually use M105 with the Softbuff yellow polishing pad with the G110/220v2 on speed 5. The M205 is usually used with the Softbuff black finishing pad on speed 3-4.

Have you tried any other product yet? What's your paint condition like? Have you tried using Ultimate Compound yet? That'll give you a better user experience overall.

[wifpd4]

Re: can i use m105

dragan, as Marc has indicated you can use M105-205, but tell us a little bit more about the car you'll be using this on and the problems you are experiencing. M105 can be a powerful corrector of defects and maybe you don't need to be using a "sledge hammer" when a "tack hammer" may do. The mantra around here is "least aggressive" method first and use a "test area".

Photos are always helpful too.

[dragan]

Re: can i use m105

i use uc whit yelow pad on 5 speed then ultimate polish yelow bud on 5 speed i got only gv220 but still can see on sun litle swirls i wos use even red bufer same on 3 speed uc and yelow buf on 5 speed litle beter but still there
or can i use red buf whit m105 and what speed?maybe beter will be,ok i will try whit yelow buf and m105 on speed 5 am i right?and after i use m205 whit yelow or black soft buf 2.0 wht speed 3 or 4?
i have renault its french car....

[dragan]

Re: can i use m105






its ok when see like this but in sun its deferent..then can see swirls and holograms.

[Marc08EX]

Re: can i use m105

Yes you can use that combo. People usually use M105 with the Softbuff yellow polishing pad with the G110/220v2 on speed 5. The M205 is usually used with the Softbuff black finishing pad on speed 3-4.

You can also use the burgundy cutting pad with M105 but this may cause hazing and micro-marring that's why it's not recommended to be used with the DA. If you experience this, you can use M205 to follow it up with a black foam finishing pad.

[Detailing by M]

Re: can i use m105

I wouldn't
M105 is a very strong cutting compound. Use a maroon pad that is designed for cutting.
yellow ''soft buff pads" are extremely gentle and isn't a cutting pad
Yellow pads are ok for a final polish like M205.
And a black pad is really just for your LSP (last step product) and not for polishing.
I think you can see by your results that this combination isn't working.

[dragan]

Re: can i use m105

^^
what you say if i understand that m205 is not say like a good choise for gv220 and yelow pad?even if i use on small speeds say 3 or 4 or is not desine for da machine?(dorry english is bad)

[Detailing by M]

Re: can i use m105

205 and a yellow pad will work fine.
and yes it's made for the DA

[dragan]

Re: can i use m105

^^
m8 thanks i will try i can lose bicouse i will paint my car this summer i will try all things but i wihs to know for the future

[dragan]

Re: can i use m105

and one big questin do i must sprade product to bufer or just do X i see people say doo this do that I am confused what is best way and can i put some on bufer final expetion or#34 bicouse off dust of m105
well thats all wish me luck i will tested on hood m105 vs uc vs others product in one pass...

[Murr1525]

Re: can i use m105

I tend to do a circle of product around the edge of the pad.

[dragan]

Re: can i use m105

^^
any lubricant or no bicouse of dust hwt he made(m105) ?

[dragan]

Re: can i use m105

after m105 and m205 can i sue vax selent 2.0 for finish on black pad
and can i use m105 on plastic lens and bumpers rear and front on same speed (5) m105