• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Am i realy need 4" pads?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Am i realy need 4" pads?

    Hi all,

    I haven't used any DA so far, so don't know should i order 4" pads with my G220-V2 beside 5.5" or not?

    4" pads and their backing plate will cost around 30 EUR for me here in Germany.


    would you please have a look to my car, and inform me that for witch sections, i would be in need of 4"?

    Would be any differentiation in final result?

    Thanks in advance,
    Ali





    Photos: paultan.org
    Tags: None
  • #2
    Re: Am i realy need 4" pads?

    You don't "need" the 4" pads for any part of that car, but they can come in handy for areas like the A-pillar next to the windshield or the area between the headlights and grille. Even then, you don't have to have the smaller pads to work on those areas. If you tape off the grille or maybe some rubber trim around the windshield, it's not a problem to have a larger pad overlap the headlight lens or the windshield glass while buffing the paint in those narrow places. We would guess that the vast majority of people do not use 4" pads when working on those areas.
    Michael Stoops
    Senior Global Product & Training Specialist | Meguiar's Inc.

    Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

    Comment

    • #3
      Re: Am i realy need 4" pads?

      Hi Michael, Thank you for advices.

      Despite it's obvious that such small pads are more handy for areas that you mentioned, but I guess that switching between big and 4" pads also may waste some products, especially in waxing.

      Just red your informative thread "An Introduction to the G110v2" an saw following photos.

      How much do you use 4" pads in your normal detailing in person? (just want to know your personal experience)
      Do you prefer to detail entire car with one backing plate or you have no hesitate to change them to meet better results?
      .
      .


      Comment

      • #4
        Re: Am i realy need 4" pads?

        Originally posted by a6l3i View Post
        Hi all,

        I haven't used any DA so far, so don't know should i order 4" pads with my G220-V2 beside 5.5" or not?

        4" pads and their backing plate will cost around 30 EUR for me here in Germany.


        would you please have a look to my car, and inform me that for witch sections, i would be in need of 4"?

        Would be any differentiation in final result?

        Thanks in advance,
        Ali


        Photos: paultan.org


        Get the 4" pads for sure, it'll help you polish out number of places on any car that are hard to reach with 5.5" pads.

        As for B/plate, 3" megs broke twice on me, so look for other alternatives as this one seems to be poorly made.

        Hope this helps.

        Comment

        • #5
          Personally i would hit the areas i coyld get with the machine with the foam pad and tape up areas you can get to with the da.

          Comment

          Previous template Next
          Working...
          X
          gtag('config', 'UA-161993-8');