Tweet
. what DA is this?
Ta
Ta
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Would anyone know ..
-
Re: Would anyone know ..
I believe it is a Kestrel DAS-6.
Comment
-
Re: Would anyone know ..
Most of them are made at same place with exception of PC7424 and few Flex. Products of China!
Comment
-
Re: Would anyone know ..
You are both right, all made in china, same product with different name.
Sold here as DAS6, herewith the specs:
Note that discounts do not apply to this product
Speed - Eccentric: 2,500 – 6,800rpm
Power: 500W - 240V
Size: 125mm backing plate to suit 6" pad
Weight: 2.2kg
Orbit: 8mm stroke
Backing Plate: 5 inch
Comment
-
Re: Would anyone know ..
Same spec as G110/220 isn't, it?Comment
-
Re: Would anyone know ..
Almost the same on paper: watts, orbiting stroke, etc. The starting speed of the Meguiar's unit is lower at 1800rpm, the Meg's also has a feedback feature that monitors load and adjusts power to compensate.Comment
-
Re: Would anyone know ..
The particular company linked to seems to have a variety of "off the shelf" designs that can be marketed under any brand name you wish. That's perfectly fine. Our G110v2 was not, however, just picked from an assortment of existing tools and, as Shawn points out, has some features that are unique in the industry.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: Would anyone know ..
If you order min of 500 you can have your name on them. None of the units have cruise control like G110V2.Comment
Comment