- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Meguiars 105 and Surbuff
Collapse
X
-
Re: Meguiars 105 and Surbuff
Originally posted by dixie_boysles View Postall these threads and I see alot of people love M105 and m205
hi Dixie Boyles,
Excuse me time to respond, but we have much work here in Brasil...
The M105 and a very good product, very personally use it.
I also like the Meguiars M205, Gtechniq P2, Menzerna 106FA and 3M Ultrafine UK.
Valeu amigo....
Comment
-
Re: Meguiars 105 and Surbuff
WOW!!! Amazing job!!! You really revived the paint to its original glory! That surbuf/M105 combo eliminates swirls like no other.
How would you compare the surbuf pad to the microfiber cutting pad? Did the M105 dry out on you?2011 Car Crazy Showcase SEMA Team
Comment
-
Re: Meguiars 105 and Surbuff
Originally posted by Andrew Wilson View PostShow de bola!
Great job !!!
Heai?!...
Tudo blz???
Me lembro que a ultima vez que nos falamos por telefone, voce estava na America Central - nao me lembro a cidade...
Voce me passou umas dicas muito boas de como usar o MCS, D300... Valeu as dicas!!!
Saudacoes do Brasil...
Miguel / Maringa-Brasil
Comment
-
Re: Meguiars 105 and Surbuff
Originally posted by Marc08EX View PostWOW!!! Amazing job!!! You really revived the paint to its original glory! That surbuf/M105 combo eliminates swirls like no other.
How would you compare the surbuf pad to the microfiber cutting pad? Did the M105 dry out on you?
Hi Marc08EX,
Sorry my friend, but my English writing is very bad.
I'll try to explain my personal opinion about the products.
Surbuff with M105: Pad aggressive compound M105 must always be filled with water a breeze. The cut is really amazing.... But in the end we get a slight "haze" . I was able to eliminate this problem with the M205, Merzerna 106FA, 3M Ultrafine UK.
Micro Fibra with Meguiars D300: Pad medium aggressive. Generates very little dust. With just three steps (cutting, refining and wax) you have a midsizeCAR POLISHED
in a few hours of service.
I hope I have answered your question ...
Valeu amigo!!!...
Comment
-
Re: Meguiars 105 and Surbuff
Originally posted by Marc08EX View PostThanks for your response!!! Your english is perfectly fine!
Have you tried using M105 with the microfiber cutting disc? How does that compare to the M105/Surbuf?
Still have not tried using this combination.
At the moment we have a lot of work here.
Can I try this combination one of these days.
Thanks for the tip.
Comment
Comment