Meguiars D300 and MF pads Vs VW Gol - Brasil

[Le Mans Car Care]

Hi,

this was a small patch of car paint.
Only three steps was used in a full-time extimate 4.5 hours.





material used for polishing














before polishing




after polishing












final weight Meguiars D300.



Thats All Folks!!! -


Obrigado Pessoal!!! -

[Marc08EX]

Re: Meguiars D300 and MF pads Vs VW Gol - Brasil

Great job on the detail! You brought back the paint from the dead! The paint now looks flawless.

But you were using the 5" MF cutting discs with the Flex 3401?! Yikes!!! That could be a problem.

Here's an article Mike recently wrote about backing plates and their corresponding pads: Backing Plates More Than Just A Way To Stick A Pad To A Buffer

[greg0303]

Re: Meguiars D300 and MF pads Vs VW Gol - Brasil

It came out great.

I used DA Microfiber Correction System with Flex 3401 and the correction is much faster than with traditional dual action polisher. However I opted for 6" discs as recommended by Meguiar's to use with forced rotation machines.

Any hazing after D300/ cutting disc step ?

[Michael Stoops]

Re: Meguiars D300 and MF pads Vs VW Gol - Brasil

Great job on the detail! You brought back the paint from the dead! The paint now looks flawless.

But you were using the 5" MF cutting discs with the Flex 3401?! Yikes!!! That could be a problem.

Yes, we're curious about this as well. The 5" discs on the backing plate that comes with the Flex 3401 won't leave much room for error with the edge of the backing plate.

What did you use after the D300?

[mb911]

Re: Meguiars D300 and MF pads Vs VW Gol - Brasil

The car looks amazing! Nice job!