3 inch backing plate for the G110v2 for wax removal

[LeMarque]

Just took delivery and am looking for recommendations for a backing plate and 4 "MF bonnets.

I'm going to be waxing my wifes SUV and would rather not remove the wax by hand.

[Murr1525]

Re: 3 inch backing plate for the G110v2 for wax removal

You would put the bonnet over a cutting or polishing pad, if that is what you mean. So The backing plate would be the same as for the pad.

[LeMarque]

Re: 3 inch backing plate for the G110v2 for wax removal

Gotcha!

Looking for 'recommendations'.

Would any backing plate work with the G110v2?

Reason I posted was because I was told it would be better to use a 4" MF bonnet then trying to remove the wax with a bonnet that fit over the 7" pad.

[Poki]

Re: 3 inch backing plate for the G110v2 for wax removal

I'm not sure why a 4" bonnet and pad would be better than the 7" if that's your question?? I have always used the 7" pad/bonnet and it works great.....even though I personally like removing the wax by hand. Bigger is better.....
Also, when your MF bonnet gets clogged with wax, just turn it inside out and use the other side....saves bonnets.

[Michael Stoops]

Re: 3 inch backing plate for the G110v2 for wax removal

It would seem that using a bonnet wrapped over a 4" pad for removing wax would be far less convenient than using a 6" to 7" bonnet wrapped pad for that purpose. We're also a bit concerned about the aggressiveness of such a small pad on a DA for this purpose; you're bound to remove more of the wax than you really want to this way, leaving very little protection behind.

But assuming you're applying wax with a DA to start with, that tool should allow you to lay down a very thin and uniform coat of wax/sealant which would subsequently be very easy to remove by hand.

[LeMarque]

Re: 3 inch backing plate for the G110v2 for wax removal

Thanks for the replies guys.

The 4" pad was actually a recommendation from the home office.

Now to search for MF bonnets to fit the over the W7207

[Poki]

Re: 3 inch backing plate for the G110v2 for wax removal

Thanks for the replies guys.

The 4" pad was actually a recommendation from the home office.

Now to search for MF bonnets to fit the over the W7207

ADS has them!

[LeMarque]

Re: 3 inch backing plate for the G110v2 for wax removal

ADS has them!

Thanks - that where i ordered them from.

Just couldn't bring myself to order another $100. to avoid the shipping. but since they're right next door, i receive the order very quickly