Meg DA polisher back ordered

[Ari]

Hey All!

I hope this thread is in the right place!

All Meg dealers in Brasil are back ordered on Meg DA polishers, 110 or 220 volts.

As a novice, I'm afraid off using the Makita 9227 which I can find here. I have in my tool box:

a) 3M DA pneumatic sander, 12000 RPM, variable speed (don't know about OPMs), 3/16" orbit

b) Makita BO5031 orbital sander 4,000 to 12,000 OPM

I can get appropriated pads for both sanders if they are OK for polishing.

The question is, items (a) and (b) are OK to start polishing or it's better if I go for a 9227 instead and practice on my old car??

I apologize for my English and wait for your help

Best from

Ari

[Ari]

Re: Meg DA polisher back ordered

OK, I ordered the Makita...

Thanks

[Ari]

Re: Meg DA polisher back ordered

Sorry about insisting on this question. Thing is, I have a 3M DA pneumatic sander, 12000 RPM, variable speed (don't know about OPMs), 3/16" orbit.

I just saw this picture of several DAs, including the red 3M pneumatic DA sander.

The question is: Is this 3M sander OK to use with the DA Microfiber Correction System ONLY, or can I use it with the Consumer line?



Best

Ari