Ultimate Compound and DA

[mongo]

I will be using Griots Da with lake County pads which one should I use with Ultimate Compound.

Using Meguiars Soft buff 2.0 pads with
1. M 205 which pad and speed
2. Ultimate Compund pad and speed
3. Ultimate polish pad and speed
4. M21v.2 balck finsishing pad speed of 3

thanx Richard

[dc2_]

Re: Ultiamte Compound and DA

i dont know much about lake country pads but...

ultimate compound goes well with softbuff 2.0 yellow polishing pad on speed 5

m205 either black finishing pad or polishing pad on speed 4 or 3
same with ultimate polish

if u use softbuff 2.0 pads make sure u get the backingplate made for them the w68da

[greg0303]

Re: Ultiamte Compound and DA

Ultimate Compound:

Meg's yellow polishing pad - DA speed 5, defect removal,
Lake Country orange light cutting pad or yellow/ cyan cutting pad - DA speed 5, defect removal;

M205, Ultimate Polish:

Meg's yellow polishing pad - DA speed 5, defect removal,
Meg's black finishing pad - DA speed 3, polishing, gloss restoration,
Lake Country orange light cutting pad - DA speed 5, defect removal,
Lake Country white/ tangerine polishing pad or black/ crimson finishing pad - speed 3, polishing, gloss restoration;

M21:

Meg's black finishing pad - DA speed 2-3, waxing,
Lake Country - black/ crimson finishing pad - DA speed 2-3, waxing.

[mongo]

Re: Ultimate Compound and DA

OK thanx much.

[mongo]

Re: Ultimate Compound and DA

I used the original CCS pads the CCS Smart pads should be better.

[greg0303]

Re: Ultimate Compound and DA

I used the original CCS pads the CCS Smart pads should be better.

CCS pads perform well. I like Hydro Tech pads too.