Hey Guys,
I've been reading the forum forever, and always wanted to buy the G110. Yesterday while driving on 95 I was forced off the road by another driver and into a orange plastic traffic barrel. When I got out of the car to look at the damage to my beloved brand new Black Audi, there are scrapes down the side of the car. I ran my nail over the marks and they are not textured. I've never used a DA before, and I am looking for suggestions for pads and products. Originally, I was thinking Ultimate Compound, W9006 Finishing Pad, W8006 Polishing pad, W7006 cutting pad, and NXT Generation Wax. After reading a bit further, I thought maybe I should consider M105 Ultimate Cutting Compound and a wool pad. However, I read that M105 is more effective with a rotary and only necessary when wet sanding. If I have to wet sand the car I will most likely take it to a professional. PLEASE HELP! I will take pictures soon. Thanks guys!
I've been reading the forum forever, and always wanted to buy the G110. Yesterday while driving on 95 I was forced off the road by another driver and into a orange plastic traffic barrel. When I got out of the car to look at the damage to my beloved brand new Black Audi, there are scrapes down the side of the car. I ran my nail over the marks and they are not textured. I've never used a DA before, and I am looking for suggestions for pads and products. Originally, I was thinking Ultimate Compound, W9006 Finishing Pad, W8006 Polishing pad, W7006 cutting pad, and NXT Generation Wax. After reading a bit further, I thought maybe I should consider M105 Ultimate Cutting Compound and a wool pad. However, I read that M105 is more effective with a rotary and only necessary when wet sanding. If I have to wet sand the car I will most likely take it to a professional. PLEASE HELP! I will take pictures soon. Thanks guys!
Comment