G-100

[madvette74]

is there a code or a link for the w-65 backing plate

[madvette74]

and they finish spray, I closed my window and lost the order form

[Chris Nemlich]

Here's a kit that has a few pads and the backing plate.

Pad Kit with Backing plate

DA Velcro Buffing System

$32.95

Hope this helps!

Chris

[madvette74]

is there a link on here where i can see all there products pads polishes backing plates micrfiber cloths ect

[Marc08EX]

Originally posted by madvette74
is there a link on here where i can see all there products pads polishes backing plates micrfiber cloths ect

Ultimate Wipes (microfiber)

Ultimate Bonnet (microfiber)

Softbuff Cutting Pads (W-7006)

Softbuff Polishing Pads (W-8006)

Softbuff Finishing Pads (W-8006)

[madvette74]

thanks bri

[Marc08EX]

Originally posted by madvette74
thanks bri

Hey, no problem! Anytime man! Don't hesitate to ask everyone in the forum!

[madvette74]

got my supplies from mequiars today

wow.. I can believe the shine, I never used a buffer untill today, what you see the first step in cutting the clear, haven't polished it yet.. thanks to Mike for putting me in the direction of supplies to get the job done.....

joe

[madvette74]

how do I enlarge this pic to see the effect??

[Tim Lingor]

Hey,

Your car looks fantastic!!!




In the gallery, click on your picture to make it full size. Then right click and select "properties". Highlight the url and the hit ctrl c. Then paste this info on the image line.

Tim

[Chris Nemlich]

Nice results!

Once you polish and wax you will be amazed by the look.

Chris

[madvette74]

thanks for the compliments guys, tomorrow i get to finsh drivers side.... I used the red foam pad, I was thinking about using a wool pad to get results faster, but seeing I am new to this, i'll stick to the original plan... cant wait to get started back on this, tired of looking at one side done, i'll put some mequiars wax on it when done...
I did make a mistake, I put a few scuff marks on my window trim, is there anyway i can get these scuff marks out??? I have a drill thats made for polishing with polishing pad but dont know what to use on it to get the fine scrathes out..

[Tim Lingor]

Hey,

If you are referring to buffer burn on the rubber trim, then this may be a problem. I have not found a satisfactory way of fixing a buffer burn on rubber. But then again, it also depends on how bad the burn really is. Can you post a photo?

Secondly, when using the W-7006 pad and #84 with the rotary, you need to be VERY cognitive of the paints temperature. This combo can create pretty high temps really fast. So, check often!!

I rarely use a wool pad unless I am buffing the finish after wet sanding. Then, I would use the wool pad with #85 Diamond Cut. This is a very aggressive combo and one I would not recommend to anyone unless you have a few years of rotary experience under your belt.

Tim