Case/pad, etc..

[JLTSX07]

Can I use 2.0 soft buff's with the stock backing plate that came with my G100 (6") I believe?

Also, which pad would I want to apply the NXT 2.0? Which pad would I want to apply the Swirl X with? (soft buff 2.0's) Also, do you think that the NXT will produce better results when applied with the DA vs. hand?

Lastly, how do you all store your DA polishers? I need to get a bag/kit for mine. Anyone know any good places to get one?

[JLTSX07]

Re: Case/pad, etc..

Also, does anyone know where I can get some foam applicator pads from Meg's?

[Murr1525]

Re: Case/pad, etc..

1. Not sure about the backing plates. Only have the 1.0 pads myself.

2. You would want the finishing pad for the Nxt. Either 9006 on the old pads or 9027 I believe is the new number.

3. You would want to use a polishing pad for ScratchX.

4. It should apply thinner by machine, which is good. I think it is removing by machine that makes a difference. Always seems shinier when I use the cutting pad with MF bonnets.

5. I have it in its box in a drawer.

6. I use ADS to shop a lot.. its a good place if you have never looked. (autodetailingsolutions.com)