• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Which DA

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Which DA

    Which DA would you prefer, or buy? The G110 or the Flex Xc 3401.
    Which pads would you prefer, Meguiar's pads, Flex pads, Lake County pads, or Edge 2000 pads.
    I am undecided which would be the better choice.
    I thank you all for your opinions in advance.
    Chef and Dr. of Min.

    God is a good God, He loves you, and He wants to bless you.
    Tags: None
  • #2
    Re: Which DA

    I went with the G110. I think the Flex would have been a good choice too, and I might consider it someday.

    However, I also like with the G110 that I have the support and knowledge of these forums. Lots of experience using the same equipment with the various products, and Meguiar's pads here, and it's the best community online, without question.

    However, I don't think the flex would have been a bad choice either.

    With the G110 working so well with 2.0 pads, it's nice to have the washable pads, that is a pretty big deal IMHO.

    Comment

    • #3
      Re: Which DA

      I don't have the G110 but I have the PC7424 and it's weak. I used the 2.0 pad with the PC and it barely spin. I just ordered the Flex 3401, it should be here tomorrow. I can't wait to try it on my gf's car this weekend.

      Comment

      • #4
        Re: Which DA

        I have the G100 and just got the new pads. I had troubles with pad saturation but fixed that real quick in a hurry.

        Haven't used the new pads with the G100 though.

        I have a new Rotary and a G110 in my future purchases. The support from buying Meguiar's products is bar none.

        My rotary choice is between a Dewalt or Makita......that's later though. The G110 is priority right now as my Harbor Freight rotary is still ticking at the moment.

        Read good stuff on the Flex, but never used one.
        Philippians 2:14 - Do all things without grumbling or questioning,

        Comment

        • #5
          Re: Which DA

          I just got my g110 a couple of days ago. I am sure you will be happy with the G110. My new toy
          2008 Toyota Tundra DC SR5 4.7L V8


          Comment

          • #6
            Re: Which DA

            Can one use the Meguiar's pads with the Flex or do you have to stay with the Flex pads?
            Chef and Dr. of Min.

            God is a good God, He loves you, and He wants to bless you.

            Comment

            • #7
              Re: Which DA

              Originally posted by drculinarian View Post
              Can one use the Meguiar's pads with the Flex or do you have to stay with the Flex pads?
              Flex recently made their backing plates a little smaller and our new Soft Buff 2.0 will fit nicely.

              Washable 7" Soft Buff 2.0 Foam Pads
              W7207 Washable Foam Cutting Pad
              W8207 - Washable Foam Polishing Pad
              W9207 - Washable Foam Finishing Pad






              Mike Phillips
              760-515-0444
              showcargarage@gmail.com
              "Find something you like and use it often"

              Comment

              • #8
                Re: Which DA

                Thanks Mike, thats just what I needed to know.
                Chef and Dr. of Min.

                God is a good God, He loves you, and He wants to bless you.

                Comment

                Previous template Next
                Your Privacy Choices
                Working...
                X