Tweet
Are there any pads smaller than 6.5 inches avaliable for the G110? I know ADS sells 4 inch pads which are compatible with DAs or rotaries with 3.5 and 4 inch backing plates but the G110s run on 4.75 inch backing plates.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Smaller pads for G110?
I believe Meguiars only sells 6.5 inch pads for the DA -
Re: Smaller pads for G110?
At this time we don't offer a smaller pad than our 6" series...
You never now what's coming up in the future...
That's why it's a great idea to visit this forum often to stay abreast of new products and even better, sign-up for the Meguiar's Garage Newsletter as we do our best to announce new products in the newsletter first.
Sign-up for the Meguiar's Garage Newsletter
Next edition goes out on August 5th
Comment
-
Re: Smaller pads for G110?
Fingers crossed... Come on 4" Soft Buff 2.0 pads!Originally posted by Mike Phillips View Post
ScottComment
-
Re: Smaller pads for G110?
Originally posted by BlueZero View PostFingers crossed... Come on 4" Soft Buff 2.0 pads!
The only reason some people get lost in thought... is because it is unfamiliar territory for them.
--VoicesInMyHead--
0101011101100101001000000100000101110010011001010010000001000111011001010110010101101011
Comment
-
Re: Smaller pads for G110?
Thanks for the quick replies everyone!Comment
-
Re: Smaller pads for G110?
Just to note... we don't have new smaller pads coming out that I know of the point of my post was that we try to announce new product introductions via the newsletter when we can.
Comment
-
Re: Smaller pads for G110?
But we have to tell you what we want... or you'll never know!Originally posted by Mike Phillips View Post
The only reason some people get lost in thought... is because it is unfamiliar territory for them.
--VoicesInMyHead--
0101011101100101001000000100000101110010011001010010000001000111011001010110010101101011
Comment
-
Re: Smaller pads for G110?
Originally posted by Mike Phillips View PostJust to note... we don't have new smaller pads coming out that I know of the point of my post was that we try to announce new product introductions via the newsletter when we can.
Sorry, I got excited! To help out the OP, I use some Lake Country pads when I need a smaller size. They make 5" that work pretty good, they also make a 4" but I haven't used those yet. Just make sure you use the smaller backing plate so you don't risk touch the plate to the paint.ScottComment
-
Re: Smaller pads for G110?
+1.Originally posted by BlueZero View PostFingers crossed... Come on 4" Soft Buff 2.0 pads!
OP, Lake Country CCS 5.25" pads work great with the G110 and a 5" backing plate (the one that comes with the G110, I think w67, is perfect for them)Ivan Rajic - LUSTR Auto Detail
Chicago, Illinois
Recognized as One of the Top Nine Auto Detailers in the US by AutoWeek Magazine!!Comment
-
Re: Smaller pads for G110?
+ 2 for the smaller pads. Did it not sound like Mike almost let the cat out of the bag on the smaller pads? Or is it just wishful thinking on my part.
quality creates its own demandComment
-
Re: Smaller pads for G110?
I don't know why Meg's hasn't done it yet... it's widely known that a majority of PC/G110 users are using 5"-5.5" pads and getting much better results because of the lower power on these machines... I really hope to see some Meg's 5" pads soonOriginally posted by J. A. Michaels View Post+ 2 for the smaller pads. Did it not sound like Mike almost let the cat out of the bag on the smaller pads? Or is it just wishful thinking on my part.Ivan Rajic - LUSTR Auto Detail
Chicago, Illinois
Recognized as One of the Top Nine Auto Detailers in the US by AutoWeek Magazine!!Comment
Comment