Tweet
Which pad, 8006 or 9006, should be used when applying ColorX? Also, which speed on the DA-G110 should be used?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Which pad for applying ColorX
Since ColorX is a cleaner WAX I would apply it with a 9006 pad with the speed dial set to 3, I'd do the entire car let the wax sit for a while, do a swipe test then take it off either by hand or a 7006 pad covered with a bonnet with the speed set to 5.SYDSTER
-
Re: Which pad for applying ColorX
W9006 is a great choice, but if you happen to have some swirls your working on, a W8006 may be a better choice. If you are using a W8006 for swirls, kick up the machine to about 4 - 4.5.
MikeMike Pennington
Director of Global Training, Events and Consumer Relations
Meguiar's, Inc.
800-854-8073
mpennington@meguiars.comComment
Comment