• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

using deep srystal polish with g100

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • using deep srystal polish with g100

    I was wondering if I could you #83 then use deep crystal polish follow by nxt wax? Or would I be better off going #83>#80>nxt wax? My paint is light adriatic blue and its about 12 years old.

  • #2
    Always start with the mildest product first, so do a test spot with #80 if you havent yet, to see if you can use that alone.

    If you need #83, thats ok. For some people/paints, #83 can leave some light marks, which you would go back over with the #80 to remove.

    I am not sure if you will see a dramatic change if you use a pure polish, with having a light color. You could still use a pure polish (like DC#2) after the #80, and see if you can tell any difference.

    Just in case you havent had a chance to see these:

    A Lesson From White Paint

    Using the G-100 to remove swirls with the Professional Line
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #3
      Sounds good thanks for the info

      Comment

      Your Privacy Choices
      Working...
      X