Just Bought a PC7424

[devin98]

Hey Everyone,

I just ordered a PC7424 this one to be exact:

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=6057748513

I am pretty new at this I have done a ton of reading and I was just wondering what would I require to with? I know I need the pads

W-8006 and W-9006

Do I need a backing plate? if so which one?

Also what product so I need to order from Meguiars to use? I know M80 I have a 2004 Mazda with light scratches in the clear that I would like to get out that I can not by hand.

Please any advise would be great!

Thanks again!
-Devin

[TrufflePig]

Hi Devin,

yes mate you need a backing plate. you can find that here.

http://meguiars.com/?pro-backing-plates/Dual-Action-Polisher-Backing-Plates

and then a couple pads of 8006, 9006, and 7006 (for buffing) with a Bonnet Covers.

and then you'll just have to get yourself some MEGS polish, wax and you're good to go.

for the scratchs you want to get out, get a tube of SCRATCH X.

READ THIS HERE TO LEARN HOW TO USE IT PROPERLY.

How to remove a defect by hand with ScratchX

How to remove a defect by hand with ScratchX

and then have a read here and you should be good.

The 5-Step Paint Care Cycle.

Meguiar's 5-Step Paint Care Cycle

Step 1 Wash

Step 2 Clean

Step 3 Polish

Step 4 Protect

Step 5 Maintain


IN terms of products that 5- STEP PAINT CARE with list a bunch of products there. so you should be good to start there.

[devin98]

Thanks for the reply now I am in Canada, can I still order from that page? as meguiars canada is very very over priced!