Tweet
Here is my interior detail that I did tonight on my L, it took a little over an hour to complete... It needed a good after winter cleaning inside. The outside I am hoping to have done this weekend.
Here is what I did:
1. Vacuum carpet.
2. Dusted the dash, doors and trim with California dash duster.
3. Wipe dash, doors and trim with NXT Tech Protectant on an applicator pad, remove excess with cotton towel.
4. Wipe inside of windows with NXT Glass Cleaner and a cotton towel. This stuff is unbeatable!
5. Clean carpet and floor mats with Heavy Duty Carpet & Interior Cleaner and a All-Surface Interior Brush.
6. I used my Hoover steam vac to remove with excess carpet cleaner and the hope of doing more of a deep cleaning.
7. Apply a little PlastX to the gauge cluster.
8. Orange Blast my rubber snow/mud mats.
With my light interior its hard to get any before shots to show anything.
Here is a before of the drivers side:
Here is a after of the drivers side:
Here is a after:
Here is what I used, if you look at the applicators and towels you will notice it really was dirty!
I used Heavy Duty Carpet & Interior Cleaner for the first time this week. I used it per the instructions on the bottle and it worked very well, pulling the dirt out on to the clean towel. I was surprised at how well it did work using that method.
I decided to use my steam vac in an attempt to pull more dirt out of the carpet. This method to worked very well and left me with some real dirty water.
Now on to the exterior.
Here is what I did:
1. Vacuum carpet.
2. Dusted the dash, doors and trim with California dash duster.
3. Wipe dash, doors and trim with NXT Tech Protectant on an applicator pad, remove excess with cotton towel.
4. Wipe inside of windows with NXT Glass Cleaner and a cotton towel. This stuff is unbeatable!
5. Clean carpet and floor mats with Heavy Duty Carpet & Interior Cleaner and a All-Surface Interior Brush.
6. I used my Hoover steam vac to remove with excess carpet cleaner and the hope of doing more of a deep cleaning.
7. Apply a little PlastX to the gauge cluster.
8. Orange Blast my rubber snow/mud mats.
With my light interior its hard to get any before shots to show anything.
Here is a before of the drivers side:
Here is a after of the drivers side:
Here is a after:
Here is what I used, if you look at the applicators and towels you will notice it really was dirty!
I used Heavy Duty Carpet & Interior Cleaner for the first time this week. I used it per the instructions on the bottle and it worked very well, pulling the dirt out on to the clean towel. I was surprised at how well it did work using that method.
I decided to use my steam vac in an attempt to pull more dirt out of the carpet. This method to worked very well and left me with some real dirty water.
Now on to the exterior.
Comment