Tweet
APC vs QID + Natural Shine
Ok so I know you can use APC to clean the interior vinyl/plastics and then follow with natural shine (which is what I have done). But what about using APC in place of QID for light dusting etc between NS applications?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: APC vs QID + Natural Shine
While you could use a dilute mix of APC instead of QID for light dusting, you would strip all the UV protection pretty quickly. Both products are good cleaners but QID provides that critical UV protection at the same time, so it's going to be a better overall product for the long term.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
-
Re: APC vs QID + Natural Shine
Good information to know.
I was always curious on the differences of the productsComment
-
Re: APC vs QID + Natural Shine
Ok thanks for that. I thought it might be a case of looks ok but not good. Guess I'll have to go buy some.Originally posted by Michael Stoops View PostComment
Comment