1st time user Plastx, any tips

[lherring81]

My wife's car has some hazing on the headlights of her 2007 Toyota Camry, went and bout some plastx and some pads. I am going to clean them first, any tips that may give me the best results??

I am going to do it by hand with just the foam pad and a soft towel. No sandpaper, just polish i guess

[Murr1525]

Re: 1st time user Plastx, any tips

Just kind of smear a thin layer across, then work it all in. Might take a couple applications.

[lherring81]

Re: 1st time user Plastx, any tips

already seeing improvements, will post pics!

[lherring81]

Re: 1st time user Plastx, any tips

[J. A. Michaels]

Re: 1st time user Plastx, any tips

Looks very good. I bet our wife was surprised with the results.

[nevarezga]

Re: 1st time user Plastx, any tips

It looks good!, I actually messed up mine after applying a Duplicolor clear coat for extra protection, hehe now I have to sand and re polish...

[Johnson]

Re: 1st time user Plastx, any tips

I bought the Headlight restoration kit with the plastic x and the little yellow pad. Can I use sand paper to make it work a little better? and then follow up with the pad and plastic X

[Brian Hann]

Re: 1st time user Plastx, any tips

I bought the Headlight restoration kit with the plastic x and the little yellow pad. Can I use sand paper to make it work a little better? and then follow up with the pad and plastic X

Absolutely, but you will want to finish with 3000 grit paper before using the drill applicator and PlastX. This process should yield great results. Of course you may as well just try the drill applicator and PlastX before sanding. The least aggressive method necessary is always the way to go.

[Johnson]

Re: 1st time user Plastx, any tips

Its not so much that its yellow, it just has swirls and scratches in the plastic covers. It doesnt look bad, but maybe it can be alot better then it looks