After reading some of the posts on here about headlight restoration I decided to see if waxing them would help. I used Meguiar's cleaner wax followed with Tech Wax 2.0. This removed 90% of any clouding I had. My question is should I be happy with the 90% or would another of the Meguiar's product take away the rest. I want to avoid sanding if at all possible as the lights look almost new at least now they do.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
2001 MR2 headlights
Collapse
X
-
Re: 2001 MR2 headlights
I used M105 on the tail lights of our Yukon, turned out great. Did it by hand.
PlastX will do a great job as well.
By the looks of it, I don't think sanding is necessary. My Yukon headlights looked worse than that when I started and did it by hand (then later by rotary) with PlastX, took more than one pass, so be patientPhilippians 2:14 - Do all things without grumbling or questioning,
Comment
Comment