• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Thinking about getting in detailing game

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Thinking about getting in detailing game

    Yeah sometimes I have alittle trouble.LOL

    I just start pulling it out at each corner until it's streched out, sometimes I have went around each corner leg 3 or 4 times before it's streched all the way out. Then do the same thing when locking the tabs in to raise it up. Does work better for me in the grass like this.

    Also can use a strap or something simular to help hold a leg at one corner(fasten it to your bumber or ? as long as there's no chance of it coming loose and doing any damage to anything) while you pull on the other legs.

    Have had to do this a time or two on cement/blacktop surfaces, the legs would keep coming towards me when I would try pulling out on the other side.LOL

    Hope I helped
    ''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
    You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
    Test Hoods Are Cheap And Most Of The Time Free

    Comment

    Your Privacy Choices
    Working...
    X