Tweet
What would be the best combo of pads and compound(s) to remove type II acid rain etch using a Porter Cable DAP--black paint, hood only, on a 2005, Ford F-150?
Thanks.
Thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Pads and compound Q's
There's no cut & dry answer to your question, but your best bet is to start with the least aggressive method and figure out what it will take to solve your problem. I'd start with #80 on an 8006 pad, give it a couple of passes and see if it makes a difference. If its making little or no difference, I'd move up to #83 on an 8006 pad (a different one, of course) and give it a go. If #83 still doesn't do the trick after a few passes, I assume it would be time to move up to a more powerful tool such as a rotary, which certainly isn't within my skill set. Hope this helps...
Tony
"No man is so foolish but he may sometimes give another good counsel, and no man so wise that he may not easily err if he takes no other counsel than his own. He that is taught only by himself has a fool for a master." --Hunter S. Thompson
Comment